Order before 3pm (Mon - Fri) for same-day dispatch. Free delivery on orders over £35

Info

Search

Search

W2110

WRATH Alginate 3 - Life Casting Powder

Size Guide
Product Size Conversion Guide

Since the brands we have on offer are sourced from around the world, product sizings can be tricky to navigate - especially if you are like most people and have not memorised imperial to metric conversions.

Luckily we are here to help! See below our simple chart to help you out with product sizes.

Product sizes by weight (solids)

 0.5 oz.

14g

1 oz.

28g

2.5 oz.

71g

8 oz.

227g

16 oz. 454g
32 oz. 907g

 Product sizes by volume (liquids)

 0.5 fl.oz.

15ml

fl.oz.

30ml

fl.oz.

60ml

4 fl.oz.

118ml

fl.oz.

237ml

16 fl.oz. 473ml
32 fl.oz. 946ml

 

*please note the above conversions are approximate and rounded.

Product Size Conversion Guide

Since the brands we have on offer are sourced from around the world, product sizings can be tricky to navigate - especially if you are like most people and have not memorised imperial to metric conversions.

Luckily we are here to help! See below our simple chart to help you out with product sizes.

Product sizes by weight (solids)

 0.5 oz.

14g

1 oz.

28g

2.5 oz.

71g

8 oz.

227g

16 oz. 454g
32 oz. 907g

 Product sizes by volume (liquids)

 0.5 fl.oz.

15ml

fl.oz.

30ml

fl.oz.

60ml

4 fl.oz.

118ml

fl.oz.

237ml

16 fl.oz. 473ml
32 fl.oz. 946ml

 

*please note the above conversions are approximate and rounded.

Free Delivery on orders over £35

Certifications

Certified Cruelty Free Against Animals

WRATH Alginate 3 is a chromatic standard set special fx impression material used to create detailed negative moulds of hands, feet, heads and bodies. Superior quality with no harmful ingredients of which are all naturally derived. Starts out as beige/green and dries grey/white. 

A 450g pack is enough to create a single hand or foot cast. Head casts typically take 1800g (4 packs) and body casts will take a considerable amount more.

  • Pot time: 2 minutes
  • Cure time: 1 - 2 minutes
  • Colour when set: grey/white

Directions for use:

1. Measure Alginate and water into separate containers; 1 part alginate to 3 parts room-temperature water (i.e. 450g Alginate to 1350g water). Remember to use a dust mask whenever working with raw powders.

2. Depending on how you wish to cast, source a mixing bowl (if you wish to spread alginate onto the required area) or a container (if you wish to plunge a hand or foot). Carefully add the Alginate into the container to prevent excess dust and add the water onto the Alginate. Immediately start a 2 minute timer.

3. Fold the water into the powder for 20 seconds. Then use an electric whisk to blend the mixture until completely smooth and lump free.

4. After exactly 2 minutes from adding the water, apply the mixture to the desired location generously with a palette knife or plunge the hand or foot into the container.

5. Keep the model completely still for 2-3 minutes until fully set (setting to an off-white colour). If using Alginate near dense hair (such as eyebrows), it is recommended to use a generous application of water-based moisturiser to the hair immediately prior to application to ensure easy removal.

6. If the plunge method has been used, the hand or foot can now be gently wriggled free. Otherwise, plaster bandages must be applied on top of the alginate to ensure it keeps its exact shape when the model is removed.

7. Rinse the models skin with soap and cold water to remove any residual product from the skin. Moisturise skin if desired.

8. You now have a completed a negative alginate mould that can be used for casting a positive mould using plaster, wax or silicone.

Made in the UK.

450g / 15.9 oz.

We are sorry, but the ingredients list for this product is currently unavailable. At Red Carpet FX we completely understand that knowing what a product is comprised of is very important; if you require to know the ingredients, feel free to contact our customer service team and we will try our best to source them.